MOD-3

PRODUCT INFO

MOD-3 PRODUCT INFO

*** 12/23/2022: The MOD-3 is a legacy system that is being phased out. We will be ceasing production of it within the next year. Supplies are limited. If you are interested in any configuration of this system, please check with your preferred dealer regarding available quantities. The option to purchase a single mono and add on to eventually have a full bino kit may not be available over time as it has been in the past. All systems purchased will continue to be covered by the 2-year manufacturer’s warranty that comes standard with this product. ***

Until the MOD-3, you could either have a binocular OR a monocular. Using a bridge adapter to utilize two monoculars as a binocular has been done for years, but it has significant drawbacks. The weight of such a unit is over 800 grams, and they typically cannot be collimated. Many people enjoy using two monoculars when hunting. One on a neck lanyard for spotting, and one on their rifle. Yet most wish to avoid the cost of purchasing a binocular and two monoculars.

The MOD-3 overcomes these problems by utilizing Optical Pods that are waterproof, Nitrogen purged units that can be installed into either a monocular or binocular. Power is conducted to the intensifier tube and indicator LEDs by means of spring loaded, gold plated contacts. Even the springs are gold plated to prevent corrosion.

The Optical Pods can be assembled in the MOD-3 Binocular Bridge to form a full function binocular. A latching mechanism firmly holds the Optical Pods in place and is easily manipulated with one finger. Installing or removing the Optical Pods is accomplished in just a couple seconds.

The Binocular Bridge has the features you expect to find on a night vision Binocular. It has IP adjustment, dovetail mount, IR LED, IR LED “on” indicator lights in the viewing plane, and low battery warning. It also includes a circuit that powers the tubes long after most systems would have shut down, using the 3V lithium battery down to a mere 0.9V before shutting down. This allows you a large emergency reserve after your low battery indicator flashes.

The same style gold plated contacts that conduct power to the Optical Pods are also utilized in the Bridge assembly. These conduct power from the Optical Pods to a circuit board and eliminates the need for wires in the joint which moves as you change IP adjustment. This prevents any problems with wires breaking and failing in this area.

The IP adjustment is accomplished through IP screws such as the AVS goggles employ. The screws have ball detent ‘bumps’ as they are rotated, preventing vibrations from accidentally changing your settings. The MOD-3 Binocular can be collimated and weighs in at 618 grams.

Like the Binocular Bridge, the Monocular Adapter releases the Optical pod with the press of one finger, allowing instant changeover from monocular to binocular. The monocular housing is waterproof and has a side mount like a PVS-14, allowing you to use it as you would any other monocular with head and weapon mounts. The monocular is 75 grams lighter than a PVS-14.

Several enhancements have been implemented to take the MOD-3 bridge a step beyond the original release. We have redesigned the Pod Slider, the female dovetail which accepts the Optical Pod, to be made out of aluminum. This ensures a more rugged design which is better able to handle drops and impacts. Having the Pod Sliders made from aluminum also allows us to add adjustment screws which removes play between the Pod Slider and the bridge.

The design change also allows us to relocate the lanyard attachment point. Now, instead of the neck lanyard passing through the corner of the bridge, we have moved the attachment point to the rearmost corner of the Pod Slider. This allows the binocular to hang downward, protecting the lenses. We also changed the design of the Optical Pod release so that it is much more ergonomic and easier to manipulate.

In keeping with our goal to provide quality user-friendly products, the total weight increase from the MOD-3 to MOD-3B design is only 9 grams (0.3 oz).

MOD-3 Binocular Specifications:
Tubes: compatible with mx-10160 style
Optics: compatible with PVS-14 mil spec optics
Battery: 1 CR123
Weight: 618g (21.7oz) with battery, no eyecups or lens covers
Size: L 4.4 x W 4.96 x H 3.2
Mounting Options: Dovetail (like PVS-15)
IR LED: Flood type, with IR LED “on” indicator in viewing plane.
IP Adjustment: 56mm (2.2”) to 75mm (2.96”)
Low Battery Indicator: Indicator flashes in the viewing plane at 2.1V. Battery extender circuit powers tubes only down to 0.9V battery level for emergency use.
Water Resistance: Waterproof to 66ft.
Warranty: 2 years on housing and electronics.

MOD-3 Monocular Specifications:
Tubes: compatible with mx-10160 style
Optics: compatible with PVS-14 mil spec optics
Battery: 1 CR123
Weight: 318g (11.2oz) with battery, no eyecups or lens covers
Size: L 4.4 x W 1.9 x H 2.88
Mounting options: Side mount, like PVS-14
IR LED: Flood type, with IR LED on indicator in viewing plane. Accepts spot/flood like PVS-7.
Low Battery Indicator: Indicator flashes in the viewing plane at 2.1V. Battery extender circuit powers tubes only down to 0.9V battery level for emergency use.
Water Resistance: Waterproof to 66ft.
Warranty: 2 years on housing and electronics.

AB NightVision Inc. MOD-3 Modular Night Vision Systems are available for purchase through the retailers listed on our Dealer Info page. Supplies are limited.